翻訳と辞書
Words near each other
・ Scared to Death
・ Scared to Death (1981 film)
・ Scared to Death (disambiguation)
・ Scared Weird Little Guys
・ Scared!
・ Scaredy Camp
・ Scaredy Cat
・ Scaredy Cat (audio drama)
・ Scaredy Squirrel
・ Scaredy Squirrel (season 1)
・ Scaredy Squirrel (TV series)
・ Scaredycat
・ Scareware
・ Scarf
・ Scarf (disambiguation)
Scarf joint
・ SCARF syndrome
・ Scarface
・ Scarface (1932 film)
・ Scarface (1983 film)
・ Scarface (iOS game)
・ Scarface (novel)
・ Scarface (Push It to the Limit)
・ Scarface (rapper)
・ Scarface (soundtrack)
・ Scarface Charley
・ Scarface Claw
・ Scarface discography
・ Scarface gang
・ Scarface Nation


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Scarf joint : ウィキペディア英語版
Scarf joint

A scarf joint (also known as a scarph joint) is a method of joining two members end to end in woodworking or metalworking.〔.〕 The scarf joint is used when the material being joined is not available in the length required. It is an alternative to other joints such as the butt joint and the splice joint and is often favored over these in joinery because it yields a barely visible glue line.
==The scarf joint in wood==

In woodworking, there are two distinctly different categories of scarf, based on whether the joint has interlocking faces or not. A plain scarf is simply two flat planes meeting on an angle relative to the axis of the stock being joined, and depends entirely on adhesive and/or mechanical fastening (screws, bolts, etc.) for all strength. Hooked, keyed, and nibbed scarfs are some of the many example of interlocking scarfs, offering varying degrees of tensile and compressive strength, though most still depend on mechanical fastening to keep the joint closed.
The plain scarf is not preferred when strength is required, so it is often used in decorative situations, such as the application of trim or moulding. The use of modern high-strength adhesives can greatly increase the structural performance of a plain scarf.
The keyed hook scarf is common in ship and boat-building, as well as timber framing and wooden bridge construction. In large timbers such as these the scarf is virtually always secured with through bolts, and is frequently reinforced externally with iron or steel fishplates, and/or strapping.
A scarf joint may also be used to fix problems caused when a board is cut too short for the application. The board can be cut in half with a tapered cut yielding a scarf joint. When the joint is glued together, the tapers are slid against each other so that the two sections are no longer in line with each other. This has the effect of making the board longer. Once the glue has set, the board can be planed down to an even thickness, resulting in a longer but thinner board.
In traditional timber framing there are many types of scarf joints used to join timbers.

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Scarf joint」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.